We are able to offer a wide selection of window types to suit personal requirements, in softwood or hardwood.
We are a manufacturer of Traditional Sliding Sash Windows in Essex. Windows can be manufactured with either full section or applied glazing bars. These windows are suitable for fitting where an authentic window is required. The windows are fitted with pulleys, cords and weights which operate within a box frame. Traditionally sliding windows have been subject to draughts, therefore we recommend the fitting of brush seals, which as well as reducing heat loss have the added benefit of providing a smoother slide for the sashes. We fit staff beads and parting beads which have an inbuilt brush seal. In addition this seal is introduced into the meeting rails of the sashes. It is possible for a small additional cost to increase the provision to a double seal, by installing the brush all around each sash where it abuts the frame, together with a second seal on the meeting rails.
click on any of the images below to enlarge.
Other options available
* Single glazing with either face putty or putty line glazing beads
* Any variation on double or even triple glazing
* Sash Horns can be included if required to top and or bottom sashes
* Fixed or sliding sidelights on double or triple windows.
* Differing projections on window cills or face mounted cill extensions.
* Trickle ventilators
* Wide selection of ironmongery available
* Paint finish to your requirements
* A wide choice of locking and non locking fasteners
* Additional brush seal to the edges of opening sashes
* A range of additional security measures including Sash stops in a variety of design and finishers, and sash screws
* Stainless steel sash chain in place of cord
* Round or square end pulleys
* To aid the process of cleaning we can fit the simplex swing system
* Double Brush Seals
Solid Frame Sliding Sash Windows are spring balanced utilising standard or assisted spiral balances. Alternative systems include tilting windows for ease of cleaning, sliding windows which can be operated by turnable handles and even a motorised operating system. We fit staff beads and parting beads which have an inbuilt brush seal. In addition this seal is introduced into the meeting rails of the sashes. It is possible for a small additional cost to increase the provision to a double seal, by installing the brush all around each sash where it abuts the frame, together with a second seal on the meeting rails.
Other options available
* Single glazing with either face putty or putty line glazing beads
* Any variation on double or even triple glazing
* Sash Horns can be included if required to top and or bottom sashes
* Fixed or sliding sidelights on double or triple windows.
* Differing projections on window cills or face mounted cill extensions.
* Trickle ventilators Wide selection of ironmongery available
* Paint finish to your requirements
Traditional Casement Windows are manufactured to receive double glazed units complying with current building regulations in respect of heat loss and means of escape. They fit flush with the frame and have concealed weather-stripping.
Other options available
* Single glazing with either face putty or putty line glazing beads (subject to amendment of timber sections)
* Any variation on double or even triple glazing (subject to amendment of timber sections)
* Fixed or sliding sidelights on double or triple windows.
* Differing projections on window cills or face mounted cill extensions.
* Trickle ventilators
* Wide selection of ironmongery available
* Paint finish to your requirements
* A wide choice of locking and non locking fasteners and stays
* A range of additional security measures including key operated locks and window restrictors
* As well as the traditionally hung windows as described, we are also able to offer windows hung on stainless steel friction hinges fitted with multipoint locking and locking handles
Modern Stormproof Section Windows are also fully weather-stripped and are rebated over the frame offering a greater resistance to the elements.
Other options available
* Single glazing with either face putty or putty line glazing beads (subject to amendment of timber sections)
* Any variation on double or even triple glazing (subject to amendment of timber sections)
* Fixed or sliding sidelights on double or triple windows.
* Differing projections on window cills or face mounted cill extensions.
* Trickle ventilators
* Wide selection of ironmongery available
* Paint finish to match colour required
* A wide choice of locking and non locking fasteners and stays
* A range of additional security measures including key operated locks and window restrictors
* As well as the traditionally hung windows as described, we are also able to offer windows hung on stainless steel friction hinges fitted with multipoint locking and locking handles
Windows can be supplied unglazed, glazed or if including our optional fixing service we can remove existing windows and supply and install fully finished windows giving you the benefit of dealing with one company.
Sizes All windows are made to order, therefore there is no limitation on size
Materials Our standard starter range is manufactured in treated softwood (Selected European redwood) with hardwood (Sapele) cills
Profiles We offer a choice sections such as square, chamfered, stop chamfered, ovolo or lambs tongue moulded sashes. Other sections are available where required, for instance if matching an existing window.
Glazing bars Where fitted, choice of traditional glazing bars or applied internal/external bars to various designs.
Cills Flush, extended or flush with loose cill extensions
Ironmongery Various fasteners are available in a wide variety of polished and satin finishes, including brass, chrome, stainless steel as well as numerous variations. We source the fittings individually for each project, therefore we can cater for most requirements.
Glazing We can adapt to any glazing specification required. Glass can be toughened where required to comply with building regulations. On projects with applied glazing bars, we normally fit an integral bar between the two panes, and in addition use toughened glass as standard. Where required, obscured glass can be fitted in a variety of styles.
